Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam     

范颖芳  周晶冯新 《中国海洋工程》2004,18(1):107-118

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.  相似文献   

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China   总被引：1，自引：0，他引：1  

李九发  万新宁何青应铭  时连强S.M.Hutchinson 《中国海洋工程》2004,18(1):149-156

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.  相似文献   

千里岩的气温变化特征及其与西北太平洋副热带高压的关系     

贾瑞丽  郭可彩 《海洋预报》1997,14(4):67-72

本文根据１９６０～１９９４年千里岩和青岛月平均气温资料，分析了千里岩与青岛３５年来气温的年、季变化特征及差别，发现３５年来，千里岩和青岛的年、季平均气温均呈变暖趋势，但千里岩增温幅度较青岛小。从分析中发现，与气温变暖趋势相对应，西北太平洋副热带高压（以下简称副高）面积、强度指数的年、季变化也呈明显的增强、增大趋势。且年平均气温与冬季副高面积指数相关最显著。最后依此关系建立回归方程，并预测了１９９６年千里岩年平均气温的变化趋势。  相似文献   

东海区小黄鱼渔业生物学现状的分析   总被引：15，自引：1，他引：15  

林龙山  程家骅 《中国海洋大学学报(自然科学版)》2004,34(4):565-570

以2001年东海区渔业资源监测调查资料为依据，对小黄鱼的体长、体重、生长、死亡等渔业生物学特征及临界年龄等进行了分析研究。结果表明，目前东海区小黄鱼优势体长组为110～130mm，占41．34％；优势体重组为20～40g，占50．91％；总死亡系数为2．05，自然死亡系数为0．58，捕捞死亡系数为1．47，临界年龄为2．18龄。对照东海区小黄鱼生物学特征的历史状况分析，目前东海区小黄鱼个体小型化、低龄化、性成熟提早现象明显，生物学参数发生较大变化。建议在东海区现行资源状态下，小黄鱼的可捕标准应充分考虑其生物学现状加以科学调整。  相似文献   

红海湾水域溶解氧、pH值、盐度和营养盐分布特征及相互关系研究   总被引：10，自引：0，他引：10  

王小平  贾晓平  林钦  李纯厚  甘居利  蔡文贵  王增焕  吕晓瑜 《海洋通报》1999,18(5):35-40

通过１９９８年６月对广东省红海湾海水养殖水域环境因子的调查,阐述了海水中溶解氧、盐度、ｐＨ值和营养盐的分布特征及其变化规律,并讨论了它们之间的相互关系,结果表明,溶解氧及海水ｐＨ值随温度由北（除１５￣１７号站）向南（除６号站）增高而增高。同时证实了光合作用是导致溶解氧含量和ｐＨ值增高的主要原因。而营养盐与盐度呈密度的负相关,浮游植物总量随营养盐由北向南降低而明显增高。  相似文献   

A three-dimensional ocean general circulation model for mesoscale eddies——Ⅱ Diagnostic analysis     

Wang Ji  Moto Ikeda 《海洋学报(英文版)》1997,16(1):29-43

A three-dimensional density field associated with mesoscaie unstable waves generated by the 3-D, primitive-equation model (Wang and Ikeda, 1996) is provided to the quasi-geostrophic pressure tendency and ω-equations, and to the (ageostrophic) Q-vector equation. Diagnostic analyses, analogous to the approaches in meteorology: ω-equation and Q-vector method, are for the first time developed to examine the mesoscaie dynamical processes and mechanisms of the unstable waves propagating in the mid-latitude ocean. The weaknesses and strengths of these two diagnostic approaches are evaluated and compared to the model results. The Q-vector method is then recommended to diagnose the vertical motion associated with the mesoscaie dynamics from a hydrographic CTD (conductivity-temperature-depth) array, while the quasi-geostrophic equations produce some small-scale features (errors) in the diagnosed fields.  相似文献   

Design of Mooring System for Oil Storage Vessels     

LI  Wen-long 《中国海洋工程》2003,17(4):541-550

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab  相似文献   

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints     

Chen Tieyun Zhang Huiyuan Professor  Shanghai Jiao Tong University  Shanghai Doctor of Engineering  Shenzhen Shipbuilding Trading Co. LTD. 《中国海洋工程》1993,(1)

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.  相似文献   

具有国际先进水平的CTD定标检测设备   总被引：1，自引：0，他引：1  

于厚隆  贾肇基 《海洋技术学报》2001,20(1):124-129

在国家863计划的支持下，海洋技术研究成功研制了一套CTD仪器的校准设备，本文介绍了设备的组成，性能，设计经过与SBE设备进行了比较，表明该设备达到了EOCECTD设备的校准要求，同时，该设备是海洋技术研究所开发自有的高度CTD剖面仪的有力工具。  相似文献   

一类非线性二阶常微分方程解的多重性     

朴大雄  贺佳 《中国海洋大学学报(自然科学版)》2007,37(6):1039-1044

考虑一类二阶非线性常微分方程的边值问题（p（t）u′）′＋h（t）f（u）=0，0＜t＜1和u（0）=u（1）=0。通过引入f（s）／s在∞与0处的极限值，并运用打靶法和相应的Sturm比较定理得到解的多重性定理，推广有关文献中的许多重要结果。  相似文献